Starter Solenoid: Testing and Inspection

Starter Solenoid Test

M/T model

1. Remove the starter. Removal and Replacement

2. Remove the motor cable (A).

3. Check the hold-in coil for continuity between the S terminal and the armature housing (ground) (B). There should be continuity.
- If there is continuity, go to step 4.

- If there is no continuity, replace the solenoid.

4. Check the pull-in coil for continuity between the S terminal and the M terminal. There should be continuity.
- If there is continuity, the solenoid is OK.

- If there is no continuity, replace the solenoid.





5. Install the motor cable.

6. Install the starter. Removal and Replacement