Transmission End Cover Transmission Fluid Pressure Switch Replacement (A/T)

Transmission End Cover Transmission Fluid Pressure Switch Replacement

1. Remove the 2nd clutch transmission fluid pressure switch (A).

2. Make sure there is no water, oil, dust, or foreign particles inside the connector.

3. Install a new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), then tighten the switch to the specified torque on the metal part, not the plastic part.

4. Remove the 3rd clutch transmission fluid pressure switch (C).

5. Make sure there is no water, oil, dust, or foreign particles inside the connector.

6. Install a new 3rd clutch transmission fluid pressure switch and a new sealing washer (D), then tighten the switch to the specified torque on the metal part, not the plastic part.