Trunk Lid Torsion Bar Replacement (2-Door)

Trunk Lid Torsion Bar Replacement

Special Tools Required

- Torsion bar assembly tool 07AAF-SNAA100

2-door

1. Remove the clips, then remove the torsion bar cover (A).






2. Remove the torsion bars (A) from the torsion bar clips (B).






3. Put on gloves to protect your hands. Remove the torsion bars with the torsion bar assembly tool from both trunk lid hinges. First remove the left torsion bar (A), then remove the right torsion bar (B).






4. Remove the torsion bar clips (A) from the body.






5. Install the torsion bars in the reverse order of removal, and note these items:
- Adjust the torsion bars forward or rearward with the torsion bar assembly tool.

- The torsion bars were installed at the factory in the normal position, as shown.

- Make sure the trunk lid opens properly and locks securely.