Rear Seat Cushion Cover Replacement (2-Door)

Rear Seat Cushion Cover Replacement

2-door

NOTE:

- Take care not to tear or damage the seat covers.

- Put on gloves to protect your hands.

1. Remove the seat cushion. Rear Seat Removal/Installation

2. From the back of the seat-back, release the upholstery rings (A), then remove the insulator (B).






3. Release all the upholstery rings (A) in the seat cushion cover. Pull out the cushion cover straps (B) through the holes in the seat cushion pad.






4. Pull back the edge of the seat cushion cover all the way around, and release the upholstery rings (A), then remove the seat cushion cover (B).






5. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) and pad wires (C) with new ones using commercially available upholstery ring pliers (D).