Lower Front Bumper Grille Replacement

Lower Front Bumper Grille Replacement

Special Tools Required

- KTC trim tool set SOJATP2014*

With Front Fog Lights

NOTE:

- Take care not to scratch the front bumper.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the front bumper. Service and Repair

2. Remove the clips, and release the hooks (A), then remove the lower front bumper grille (B) from the front bumper (C).
NOTE: To release the clips, pry up on the center pin at the notch (D).

3. Install the bumper grille in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.