Rear Seat Cushion Leg Replacement

Rear Seat Cushion Leg Replacement

NOTE:

- Take care not to tear the seams or damage the seat covers.

- Put on gloves to protect your hands.

- Take care not to kink the cable.

- The left rear seat cushion is shown, the right rear seat cushion is similar.

1. Remove the rear seat assembly. Rear Seat Removal/Installation

2. Remove the rear seat cushion. Overhaul

3. Remove the rear seat cushion cover/pad and the silencer. Rear Seat Cushion Cover/Pad Replacement

4. Remove the leg (A) from the seat cushion frame (B):
-1 Disconnect the control cable.
-2 Release the push nuts (C), then remove the set pins (D).
-3 Remove the leg.
-4 If necessary, remove the bushings (E), the cable hook (F), and the spring pins (G).

5. Install the leg in the reverse order of removal, and note these items:
- Replace the push nuts and spring pins you removed with new ones.

- Make sure the control cable is connected securely.

- Apply multipurpose grease to the inside surfaces of the brackets (H).