Drivers Dashboard Lower Cover Removal/Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Take care not to scratch the dashboard or its related parts.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the fuse access panel. Dashboard Fuse Access Panel Removal/Installation

2. Remove the driver's dashboard lower cover (A).
-1 Pry the front edge of the cover away from the dashboard to release the clips.
-2 Pull the cover down to release the hooks (B), then remove the cover.

3. Install the lower cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.