Symptom Troubleshooting

Symptom Troubleshooting: Side airbag cutoff indicator stays on

Side airbag cutoff indicator stays on

1. Make sure nothing is on the front passenger's seat.

2. Make sure the seat-back is dry.

3. Turn the ignition switch to ON (II), and see if the SRS indicator comes on.

Does the SRS indicator come on and stay on?
YES - Go to the Symptom Troubleshooting "SRS indicator stay on, but no DTCs are stored."

NO - Go to step 4.


4. Connect the HDS to the data link connector (DLC). Initial Inspection and Diagnostic Overview

5. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit. Testing and Inspection

6. Select BODY ELECTRICAL with the HDS.

7. Check for DTCs in the Gauge Menu with the HDS.

Is DTC B1187 indicated?
YES - Troubleshoot DTC B1187. B1187

NO - Initialize the ODS unit. Programming and Relearning If the problem is still present, replace the OPDS sensor/seat-back cover/pad. Front Seat-Back Cover/Pad Replacement