Oil Pan, Engine

OIL PAN

NOTE: Wait at least 30 minutes before filling the engine with oil.

Do not run the engine for at least 3 hours after installing the oil pan.

Make sure to install the bolts in the correct locations according to size.






Tighten the bolts in three steps. Wipe off the excess liquid gasket on the each side of crankshaft pulley and the flywheel/drive plate.

Specified torque

Bolt 1 24 N-m (2.4 kgf-m, 17 lbf-ft)
Bolts 2-13 12 N-m (1.2 kgf-m, 8.8 lbf-ft)