A/T Idler Gear Shaft Bearing Replacement

A/T Idler Gear Shaft Bearing Replacement

Special Tools Required

- Adjustable bearing puller, 20-40 mm 07736-A01000B or 07736-A01000A
- Driver handle, 15 x 135L 07749-0010000
- Attachment, 52 x 55 mm 07746-0010400
1. Remove the idler gear shaft bearing from the end cover using the adjustable bearing puller (20-40 mm) and a commercially available 3/8 ''-16 slide hammer (A).






2. Install the new bearing in the end cover using the driver handle and the attachment (52 x 55 mm).