Convertible Top Latch: Adjustments

Convertible Top Lock Handle Operation Load Adjustment

NOTE: Take care not to scratch the interior parts.

1. Remove both rear tray side trims. Interior Trim Removal/Installation - Rear Tray Area (Except CR model)

2. Close the convertible top, then lock it securely with both lock handles (A).

3. Loosen the locknut (B) on the link stop (C) on each side.

4. Adjust the link stop on each side until it makes contact with the link set bracket (D). There should be no clearance between the convertible top striker (E) and the hook (F).

5. Tighten the locknut, and check that the lock handle works smoothly on each side.

6. Reinstall all removed parts.