Rear Tray Opening Molding Replacement

Rear Tray Opening Molding Replacement

NOTE:

- Take care not to scratch the body.

- Be careful not to pry too far or you may bend the molding.

- Put on gloves to protect your hands.

1. Remove these items, then remove the rear tray opening molding as shown:
- Convertible top assembly Service and Repair

- B-pillar outer weatherstrips, both sides Convertible Top B-Pillar Outer Weatherstrip Replacement

- Drain tank, both sides Service and Repair

2. Remove the rear tray opening molding as shown.

3. Install the molding in the reverse order of removal.