Hard Top Weatherstrip: Service and Repair

Removable Hardtop Lower Weatherstrip Replacement

NOTE:

- Remove the hardtop from the body before removing or installing the lower weatherstrip.

- Take care not to scratch the hardtop.

- Use a clip remover to remove the clips.

1. Remove the rear window lower trim. Removable Hardtop Interior Trim Removal/Installation

2. Remove the hardtop lower weatherstrip as shown.

3. Install the weatherstrip in the reverse order of removal, and note these items:
- Before installing the weatherstrip, clean the roof bonding surface with isopropyl alcohol.

- If the old weatherstrip will be reinstalled, scrape off the double-sided adhesive tape, then clean the weatherstrip surface with isopropyl alcohol. Attach new double-sided adhesive tape to the weatherstrip.

- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

- Before installing the weatherstrip, fold the edge of the adhesive backing from the double-sided adhesive tape. After installing the weatherstrip, carefully pull the adhesive backing away.

- Press the double-sided adhesive tape portion to make the adhesive stick.