Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Pulley Removal and Installation

Special Tools Required

- Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
- Holder handle 07JAB-001020B
- Holder attachment, 50 mm 07NAB-001040A

Removal

1. Hold the pulley with the holder handle (A) and the holder attachment (B).

2. Remove the bolt with a heavy duty 19 mm socket (C) and a breaker bar.






Installation

1. Remove any oil and clean the bolt (A), the washer (B), the pulley (C), and the crankshaft (D). Lubricate with new engine oil as shown.






2. Install the crankshaft pulley, and tighten the bolt to 260 N-m (26.5 kgf-m, 192 lbf-ft). Do not use an impact wrench.
-1 Hold the pulley with the holder handle (A) and the holder attachment (B).
Tighten the bolt with a torque wrench and a heavy duty 19 mm socket (C).