Diesel Data: Automotive Repair
Home >> Honda >> 2009 >> S2000 L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Service and Repair >> Removal and Replacement >> Camshaft Gear Removal

Camshaft Gear Removal




Camshaft Gear Removal

1. Remove the cylinder head cover. Cylinder Head Cover Removal

2. Loosen the locknuts and the adjusting screws. Rocker Arm Assembly Removal

3. Remove the camshaft holders and the camshafts To prevent damaging the camshafts, loosen the camshaft holder bolts in sequence two turns at a time, in a crisscross pattern.. Cylinder Head Removal

4. Hold the camshaft with an open-end wrench, then loosen the camshaft gear mounting nut.






5. Remove the camshaft gear.
NOTE: The exhaust camshaft gear has a groove (A) in the face. The intake camshaft gear does not have a groove.





Diesel-Data.com