After Warming Up, Idle Speed Is Above Specification Without Load (MIL Works OK, No DTCs Set)

After warming up, idle speed is above specification without load (MIL works OK, no DTCs set)

Diagnostic Procedure:

1. Adjust the throttle cable. Adjustments

2. Troubleshoot the alternator FR signal circuit. Alternator FR Signal Circuit Troubleshooting

3. Inspect the APP sensor. Testing and Inspection

4. Troubleshoot the A/C signal circuit. A/C Signal Circuit Troubleshooting

5. Troubleshoot the EPS signal circuit. Electrical Power Steering (EPS) Signal Circuit Troubleshooting

Also check for:

- Intake air leaks