Steering Gearbox Bracket Removal/Installation

Steering Gearbox Bracket Removal/Installation

1. Remove the bracket clamp bolt (A) from the gearbox bracket (B), then pry open the bracket to remove it from the gearbox.

2. Install the gearbox bracket on the gearbox with the bracket clamp bolt toward the rear.






3. Adjust the distance between the bracket mounting bolt hole (A) and the gearbox mounting bolt hole (B) to the dimension shown. Make sure the bracket mounting bolt holes are parallel with gearbox mounting bolt holes.

4. Install the bracket clamp bolt, and tighten it to 25 N-m (2.5 kgf-m, 18 lbf-ft).