Seals and Gaskets: Service and Repair

Rear Differential Oil Seal Replacement

Special Tools Required

- Oil seal driver 07JAD-PL90100
1. Remove the output shaft (A) from the differential using pry bars (B).






2. Remove the oil seal (A).
NOTE: Be careful not to damage the differential case while prying out the seal.






3. Install the oil seal using the oil seal driver (A) as shown.

4. Repeat step 1 through 3 for the other side.






5. Replace both clips (A) on the output shafts. Make sure the clips are installed in the output shaft grooves (B).






6. Install the output shafts (A) into the differential.