A/T Clutch Pressure Control Solenoid Valve B and C Replacement

A/T Clutch Pressure Control Solenoid Valve B and C Replacement

1. Remove the air cleaner assembly Service and Repair and the intake air duct.

2. Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (B).

3. Disconnect the A/T clutch pressure control solenoid valve connectors.






4. Remove A/T clutch pressure control solenoid valves B and C.

5. Remove the ATF pipe (A), the ATF joint pipes (D), the O-rings (E), and the gasket (F).

6. Clean the mounting surface and the fluid passages of the transmission housing.

7. Install a new gasket with the blue side down and the white side up on the transmission housing.

8. Install the ATF pipe and the ATF joint pipes, and install new O-rings over the ATF joint pipes.

9. Install new A/T clutch pressure control solenoid valves B and C.

10. Check the connectors for rust, dirt, or oil, and clean or repair if necessary, then connect the connectors securely.

11. Secure the harness cover with the mounting bolts, and install the harness clamp.

12. Install the intake air duct and the air cleaner assembly. Service and Repair