Transmission Fluid Pressure Switch B (3RD Clutch) Replacement

Transmission Fluid Pressure Switch B (3rd Clutch) Replacement

1. Raise the vehicle on a lift, or apply the parking brake, block the rear wheels, and raise the front of the vehicle. Make sure it is securely supported.

2. Remove the splash shield.

3. Disconnect the transmission fluid pressure switch B (3rd clutch) connector, then remove transmission fluid pressure switch B (3rd clutch).

4. Install new transmission fluid pressure switch B (3rd clutch) with a new sealing washer (A), and tighten the switch to the specified torque by turning the metal part, not the plastic part.

5. Check the connector for rust, dirt, or oil. Clean or repair the connector if necessary, then reconnect the connector securely.

6. Install the splash shield.