Transmission End Cover Selector Control Shaft Bearing Replacement

Transmission End Cover Selector Control Shaft Bearing Replacement

Special Tools Required

- Driver handle, 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-001A800
1. Remove the oil seal from the end cover.






2. Remove the selector control shaft bearing from the end cover.






3. Install a new bearing flush with the end cover using the driver handle and the 22 x 24 mm attachment.






4. Install a new oil seal flush with the end cover using the driver handle and the 22 x 24 mm attachment.