Transmission End Cover Transmission Fluid Pressure Switch Replacement

Transmission End Cover Transmission Fluid Pressure Switch Replacement

1. Remove the transmission fluid pressure switch A (2nd clutch).

2. Make sure there is no water, oil, dust, or foreign particles inside the connector.

3. Install new transmission fluid pressure switch A (2nd clutch) and a new sealing washer (C), then tighten the switch to the specified torque on the metal part, not the plastic part.

4. Remove the transmission fluid pressure switch B (3rd clutch).

5. Make sure there is no water, oil, dust, or foreign particles inside the connector.

6. Install new transmission fluid pressure switch B (3rd clutch) and a new sealing washer (D), then tighten the switch to the specified torque on the metal part, not the plastic part.