Transmission Fluid Pressure Switch A (2ND Clutch) Replacement

Transmission Fluid Pressure Switch A (2nd Clutch) Replacement

1. Remove the air cleaner assembly Service and Repair and the intake air duct.

2. Remove the harness clamp (A) from its bracket, and remove the air cleaner housing bracket (B).






3. Disconnect the transmission fluid pressure switch A (2nd clutch) connector, and remove transmission fluid pressure switch A (2nd clutch).

4. Install new transmission fluid pressure switch A (2nd clutch) with a new sealing washer (B), and tighten the switch to the specified torque by turning the metal part, not the plastic part.

5. Check the connector for rust, dirt, or oil. Clean or repair the connector if necessary, then reconnect the connector securely.

6. Install the air cleaner housing bracket, and install the harness clamp on its bracket.

7. Install the intake air duct and the air cleaner assembly. Service and Repair