Rear Seat Cushion Cover Replacement (4-Door Except GX Model)

Rear Seat Cushion Cover Replacement

4-door

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear or damage the seat covers.

1. Remove the seat cushion. Rear Seat Removal/Installation

2. From the back of the seat-back, pass both lower retainers (A) through the slots in the seat cushion pad, and release all the upholstery rings (B), and fold back the seat cushion cover.






3. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B). Pull out the cushion cover straps through the holes in the seat cushion pad, then remove the cover.






4. Install the cushion cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).