Set Speed Doesn't Resume when Resume/Accel Button is Pressed (Main Switch On, Set Speed Cancelled by Brake Pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.

Check the brake pedal position switch adjustment Adjustments.

Do the cruise control combination switch test Cruise Control Combination Switch Test.

Do the cruise control input test Component Tests and General Diagnostics.
Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.

Also check for

Faulty brake pedal position switch

Also check for

Open circuit, loose or disconnected terminals: LT GRN/BLK, BLU wire