Camshaft Installation

Camshaft Installation

1. Install the camshaft (A), then install the camshaft thrust cover (B) with new O-ring (C).





2. Install the camshaft position (CMP) sensor CMP Sensor Replacement.

3. Install the rocker arm assembly Rocker Arm Assembly Installation.

4. Install the camshaft sprocket Camshaft Sprocket Installation.

5. Install the harness holder, then install the ground cable Cylinder Head Installation.

6. Install the following engine wire harness connectors and wire harness clamps to the cylinder head:

- Four injector connectors
- Engine coolant temperature (ECT) sensor 1 connector
- CMP sensor connector
- Air fuel ratio (A/F) sensor connector
- Secondary heated oxygen sensor (secondary HO2S) connector

7. Install the intake manifold chamber Intake Manifold Chamber Removal/Installation.

8. Install the air cleaner housing assembly Service and Repair.