Symptom Troubleshooting

SRS Symptom Troubleshooting - Side airbag cutoff indicator stays on

Side airbag cutoff indicator stays on

1. Make sure nothing is on the front passenger's seat.

2. Make sure the seat-back is dry.

3. Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator come on and stay on?

YES -

Go to the Symptom Troubleshooting "SRS indicator stay on, but no DTCs are stored".�

NO -

Go to step 4.

4. Connect the HDS to the data link connector (DLC) Reading and Clearing Diagnostic Trouble Codes.

5. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit Testing and Inspection.

6. Select BODY ELECTRICAL with the HDS.

7. Check for DTCs in the Gauge Menu with the HDS.

Is DTC B1187 indicated?

YES -

Troubleshoot DTC B1187 B1187.�

NO -

Do the ODS unit initialization Programming and Relearning. If the problem is still present, replace the seat-back cover/pad which equipped OPDS sensor Front Seat-back Cover/Pad Replacement.�