Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to tear or damage the seat covers.

1. Remove the seat cushion:

- 2-door
- 4-door

2. From the back of the seat cushion, release all the upholstery rings (A), and fold back the seat cushion cover (B).

2-door





4-door





3. Remove the seat cushion cover (A).

1. Pull back the edge of the seat cushion all the way around.

2. Release the upholstery rings (B).

3. Release the hooks (C) of the lateral wires (D) from the longitudinal wires (E) on the pad.

NOTE: The leather seat cushion cover is shown; the other types of the seat cushion cover are similar.

2-door





4-door





4. Install the cushion cover in the reverse order of removal, and note these items:

- To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.
- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).