Side Engine Mount Bracket Replacement

Side Engine Mount Bracket Replacement

1. Remove the upper torque rod.






2. Lift and support the engine with a jack and a wood block under the oil pan.

3. Remove the ground cable (A), then remove the side engine mount bracket (B).





4. Install the side engine mount bracket, loosely install the new bolt and nut (C), then loosely install the bolt (D).

5. Install the ground cable.

6. Remove the air cleaner Service and Repair.

7. Loosen the transmission mount bracket mounting bolt and nuts (A).





8. Remove the jack and the wood block.

9. Raise the vehicle on the lift.

10. Remove the splash shield.

11. Loosen the lower torque rod mounting bolt (A).






12. Loosen the front mount mounting bolt (A).





13. Lower the vehicle on the lift.

14. Tighten the side engine mount bracket mounting bolts and nut.






15. Tighten the transmission mount bracket mounting bolt and nuts.





16. Raise the vehicle on the lift.

17. Tighten the lower torque rod mounting bolt.





18. Lower the vehicle on the lift.

19. Install the air cleaner Service and Repair.

20. Install the upper torque rod (A), then tighten the new upper torque rod mounting bolts in the numbered sequence shown.





21. Raise the vehicle on the lift.

22. Tighten the front mount mounting bolt.





23. Install the splash shield.