Camshaft Installation

Camshaft Installation

1. Insert the camshaft (A) into the cylinder head, then install the camshaft thrust cover (B). Always use a new O-ring (C). Apply new engine oil to the journals and the cam lobes.





2. Install the CMP sensor CMP Sensor Replacement.

3. Install the rocker arm assembly Rocker Arm Assembly Installation.

4. Install the camshaft sprocket Camshaft Sprocket Installation.

5. Install the harness holder, then install the ground cable.

6. Install the following engine wire harness connectors and wire harness clamps to the cylinder head:

- Four injector connectors
- ECT sensor 1 connector
- CMP sensor connector
- A/F sensor connector
- Secondary HO2S connector

7. Install the intake manifold chamber.

8. Install the air cleaner Service and Repair.