Camshaft Removal

Camshaft Removal

1. Remove the air cleaner Service and Repair.

2. Remove the intake manifold chamber.

3. Remove the following engine wire harness connectors and wire harness clamps from the cylinder head:

- Four injector connectors
- ECT sensor 1 connector
- CMP sensor connector
- A/F sensor connector
- Secondary HO2S connector

4. Remove the harness holder mounting bolt and the ground cable, then remove the harness holder from the bracket.

5. Remove the camshaft sprocket Camshaft Sprocket Removal.

6. Remove the rocker arm assembly Rocker Arm Assembly Removal.

7. Remove the CMP sensor CMP Sensor Replacement.

8. Remove the camshaft thrust cover (A), then remove the camshaft (B).