Instrument Cluster / Carrier: Service and Repair

Instrument Visor Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Adjust the steering column to the full tilt down position.

2. Detach the clips fastening the column blind cover (A) from the upper column cover (B) by hand.






3. If necessary, release the hooks (A), then remove the column blind cover (B) from the instrument visor (C).






4. Gently pull out along the edge of the instrument visor (A) to detach the clips (B, C) and release the hooks (D, E) by pulling out the visor, then remove the visor.





5. Install the visor in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.