License Plate Light Replacement (4-Door)

License Plate Light Replacement

4-door '08-10 models

1. Pull the license plate light assembly out, and disconnect the 2P connector (A) from the license plate light.









2. Separate the lens (B) and housing (C), then remove the bulb (D).

3. Install the light in the reverse order of removal.

4-door '11-12 models

NOTE: When replacing the license plate light lens, go to step 3.

1. Remove the trunk lid trim panel Interior Trim Removal/Installation - Trunk Lid, and disconnect the 2P connector (A) from the light.

License Plate Light: 5 W





2. Separate the housing (B), then remove the bulb (C).

3. Remove the trunk lower trim .

4. Separate the lens (A) and housing (B).





5. Install the light in the reverse order of removal.