Accessory Power Socket Trim Removal/Installation

Accessory Power Socket Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the console.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console Center Console Removal/Installation.

2. From under the console, remove the screws. With USB connector: disconnect the USB main harness connector (A).






3. Open the console armrest.

4. Remove the accessory power socket trim (A) from the console box (B) by releasing the hook (C).





5. Install the trim in the reverse order of removal, and note these items:

- Push the hook into place securely.
- Make sure the connector is plugged in properly.