Shift Lock Release, Release Spring, And Release Shaft Replacement (A/T)

Shift Lock Release, Release Spring, and Release Shaft Replacement

Type A Shift Lever

1. Remove the shift lever assembly A/T Shift Lever Removal.

2. Remove the A/T gear position indicator panel from the shift lever.

3. Release the lock (A) of the shift lock release (B), and remove the shift lock release and the release spring (C).





4. Release the lock (D) of the release shaft (E), and remove the shaft.

5. Replace the shift lock release, the release spring, or the release shaft.

6. Install the release spring (A) in the shift lock release (B).





7. Install the release shaft (C) in the shift lever, and install the shift lock release and the release spring on the release shaft end.

8. Make sure that the release spring end (A) is installed in the shift lock release (B), and the hooked end (C) is on the stop (D).





9. Install the A/T gear position indicator panel on the shift lever.

10. Install the shift lever assembly A/T Shift Lever Installation.