Side Engine Mount Removal/Installation

Side Engine Mount Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Engine Undercover





1. Remove the engine undercover (A).

3. Engine Jack Support (State Of A Low Vehicle)

1. Lift and support the engine with a jack and a wood block under the oil pan.

4. Mounting Bracket, Engine Side





1. Remove the ground cable (A), the side engine mount bracket (B), and the side engine mount (C).

Installation

1. Mounting Bracket, Engine Side





1. Install the new side engine mount mounting bolts (A) and the side engine mount bracket (B) using a nut and a new bolt, then loosely install the new side engine mount bracket mounting bolts and nut (C).

2. Install the ground cable (D).

2. Engine Jack Support (State Of A Low Vehicle)

1. Remove the jack and the wood block.

3. Transmission Mount Bracket Mounting Bolt - Loosen

M/T





A/T





1. Loosen the transmission mount bracket mounting bolt and nuts (A).

4. Lower Torque Rod - Loosen





1. Loosen the lower torque rod mounting bolt (A).

5. Side Engine Mount - Tighten





1. Tighten the side engine mount bracket mounting bolt and nut.

6. Transmission Mount Bracket Mounting Bolt - Tighten

1. Tighten the transmission mount bracket mounting bolt and nuts.

M/T





A/T





7. Lower Torque Rod Mounting Bolt - Tighten





1. Tighten the lower torque rod mounting bolt.

8. Engine Undercover





1. Install the engine undercover (A).