Backup Lamp Switch: Service and Repair

Trans/Driveline

Back-Up Light Switch Removal and Installation

Removal

1. Intake Air Pipe





1. Remove the intake air pipe.

2. Air Cleaner





1. Disconnect the intake air duct (A).

2. Remove the air cleaner (B).

3. Remove the harness clamp (C).

3. Back-Up Light Switch Connector





1. Remove the transmission hanger (A).





2. Disconnect the connector (A).

4. Back Up Light Switch





1. Remove the back-up light switch (A) and the 18 mm sealing washer (B).

Installation

1. Back Up Light Switch





1. Install the back-up light switch (A) with a new 18 mm sealing washer (B).

2. Back-Up Light Switch Connector





1. Connect the connector (A).





2. Install the transmission hanger (A).

3. Air Cleaner





1. Install the harness clamp (A).

2. Install the air cleaner (B).

3. Connect the intake air duct (C).

4. Intake Air Pipe





1. Install the intake air pipe.