Output Shaft (Countershaft) Speed Sensor Removal and Installation

Output Shaft (Countershaft) Speed Sensor Removal and Installation

Removal

1. Air Cleaner





1. Disconnect the intake air duct (A).

2. Remove the air cleaner (B).

3. Remove the harness clamp (C).

2. Output Shaft (Countershaft) Speed Sensor





1. Disconnect the connector (A).





2. Remove the output shaft (countershaft) speed sensor (A) with the O-ring (B).

Installation

1. Output Shaft (Countershaft) Speed Sensor





1. Install the output shaft (countershaft) speed sensor (A) using a new O-ring (B).





2. Check the connector (A) for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

2. Air Cleaner





1. Install the harness clamp (A).

2. Install the air cleaner (B).

3. Connect the intake air duct (C).