VSA System

Control System DTCs

VSA DTC Troubleshooting: 27-15

DTC 27-15 : Steering Angle Sensor Internal Circuit Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.

1. Problem verification:

Problem verification
-1. Turn the ignition switch to ON (II).

-2. Clear the DTC with the HDS.

-3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

-4. Check for DTCs with the HDS.

Is DTC 27-15 indicated?
-YES- The failure is duplicated. Replace the steering angle sensor Steering Angle Sensor Removal and Installation.
-NO- Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.