Manufacturer Code Charts: 2706

Control System DTCs

Navigation System DTC Troubleshooting: 2706

DTC 2706 : Gyro Diag: ECU Temp XX °C

NOTE:
* Check the vehicle battery condition first Battery Test.
* This navigation DTC sets when there is a problem with the internal gyro (the Yaw Sensor icon is red in the System Links), and indicates the navigation ECU temperature when the DTC is detected.
* Before you troubleshoot, make sure to follow the How to Troubleshoot the Navigation System How To Troubleshoot The Navigation System.
* Check any official Honda service website for more service information about the navigation system.

1. Problem verification:

Problem verification
-1. Clear the hard error codes How To Troubleshoot The Navigation System.

-2. Turn the ignition switch to LOCK (0) and then back to ON (II).

-3. Check for hard error codes How To Troubleshoot The Navigation System.

Is DTC 2706 indicated?
-YES- Replace the audio-navigation unit Audio-Navigation Unit Removal and Installation.
-NO- Intermittent failure, the system is OK at this time.