Passenger Assist Handle: Service and Repair

Grab Handle Removal and Installation

Removal

1. Grab Handle





1. Lower the grab handle (A).

2. Insert a small flat-tip screwdriver into the notch.





3. Pull on a small flat-tip screwdriver with the appropriate trim tool (A), then remove the cap (B).





4. Remove the grab handle (A).





5. Remove the clips (A).

Installation

1. Grab Handle - Check





1. If the side curtain airbag has not deployed, inspect the grab handle (A) for damage. A damaged grab handle may cause the side curtain airbag to deploy improperly, possibly causing injury. Replace the grab handle if it has any of the following of damage:

* Any cracks or breakage in the grab handle
* Any cracks or stress-whitening in the caps (B)

2. Grab Handle





1. Install the clips (A) on the grab handle (B).

2. Install the caps (C) fully into the clips.





3. Position the grab handle (A) on the grab handle bracket (B).

4. Push on the grab handle until the clips (C) snap into place securely.