Door Key Cylinder Switch Test (2-door)

Door Key Cylinder Switch Test

Removal

1. Front Door Panel (2-Door)





1. Remove the inner handle cap (A).





2. Remove the screw (A).





3. Remove the grip trim (A).





4. Remove the screws (A).





5. Remove the door panel (A).

Test

1. Door Key Cylinder Switch - Test (2-Door)









1. Disconnect the connector.

2. Check for continuity between the terminals in each switch position according to the table.

3. If the continuity is not as specified, the door key cylinder switch is faulty; replace the driver's door latch (A).

4. Connect the connector.

Installation

1. Front Door Panel (2-Door)





1. Install the door panel (A).





2. Install the screws (A).





3. Install the grip trim (A).





4. Install the screw (A).





5. Install the inner handle cap (A).