Drivers Door Lock Switch Test (2-door)

Driver's Door Lock Switch Test

Removal

1. Front Door Panel (2-Door)





1. Remove the inner handle cap (A).





2. Remove the screw (A).





3. Remove the grip trim (A).





4. Remove the screws (A).





5. Remove the door panel (A).

2. Front Door Power Window Switch Panel - Driver's Side (2-Door)





1. Remove the grip base (A).





2. Remove the power window switch panel (A).

Test

1. Driver's Door Lock Switch - Test









1. Check for continuity between the terminals in each switch position according to the table.

2. If the continuity is not as specified, the driver's door lock switch is faulty; replace the power window master switch (A).

Installation

1. Front Door Power Window Switch Panel - Driver's Side (2-Door)





1. Install the power window switch panel (A).





2. Install the grip base (A).

2. Front Door Panel (2-Door)





1. Install the door panel (A).





2. Install the screws (A).





3. Install the grip trim (A).





4. Install the screw (A).





5. Install the inner handle cap (A).