Rear Door Lock Knob Switch Test (4-door)

Rear Door Lock Knob Switch Test

Removal

1. Rear Door Power Window Switch Panel





1. Remove the power window switch panel (A).

2. Rear Door Panel





1. Remove the inner handle cap (A).





2. Remove the screw (A).





3. Remove the screw (A).





4. Remove the door panel (A).

Test

1. Rear Door Lock Knob Switch - Test









1. Disconnect the connector.

2. Check for continuity between the terminals in each switch position according to the table.

3. If the continuity is not as specified, the door lock knob switch is faulty; replace the rear door latch (A).

4. Connect the connector.

Installation

1. Rear Door Panel





1. Install the door panel (A).





2. Install the screw (A).





3. Install the screw (A).





4. Install the inner handle cap (A).

2. Rear Door Power Window Switch Panel





1. Install the power window switch panel (A).