Power Mirror Switch Test (2-door)

Power Mirror Switch Test

Removal

1. Front Door Panel (2-Door)





1. Remove the inner handle cap (A).





2. Remove the screw (A).





3. Remove the grip trim (A).





4. Remove the screws (A).





5. Remove the door panel (A).

2. Front Door Power Window Switch Panel - Driver's Side (2-Door)





1. Remove the grip base (A).





2. Remove the power window switch panel (A).

Test

1. Power Mirror Switch - Test (2-Door)









1. Check for continuity between the terminals in each switch position according to the table.

2. If the continuity is not as specified, replace the power mirror switch (A).

Installation

1. Front Door Power Window Switch Panel - Driver's Side (2-Door)





1. Install the power window switch panel (A).





2. Install the grip base (A).

2. Front Door Panel (2-Door)





1. Install the door panel (A).





2. Install the screws (A).





3. Install the grip trim (A).





4. Install the screw (A).





5. Install the inner handle cap (A).