VSA Off Switch Test (4-door)

VSA Off Switch Test

Removal

1. Driver's Dashboard Lower Cover





1. Remove the driver's dashboard lower cover (A).

Test

1. VSA Off Switch - Test





1. On the switch side, check for continuity between the connector terminal in each switch position according to the table.
* If the switch does not work as described in the table, replace the switch.

* If the switch tests OK, go to step 2.





2. On the switch side, check for continuity between connector terminals No. 1 and No. 2. There should be continuity at all times.
* If the continuity is not as specified, remove the cover, and replace the bulb.

Installation

1. Driver's Dashboard Lower Cover





1. Install the driver's dashboard lower cover (A).