Washer Motor Test

Washer Motor Test

Removal

1. Right Front Inner Fender as Needed





1. Detach the right front inner fender (A) as needed.

Test

1. Washer Motor - Test





1. Disconnect the connector.

2. Test the washer motor (A) by connecting battery power to terminal No. 2 and ground to terminal No. 1 of the motor. The motor should run.

* If the motor does not run or fails to run smoothly, replace it.
* If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.

Installation

1. Right Front Inner Fender as Needed





1. Install the right front inner fender (A).