Fuel Fill Door Replacement

Fuel Fill Door Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. While prying up the hook (A) with a trim tool, slide the fuel fill door (B) back to release four wedges (C) from the hooks (D) of the fuel fill door hinge (E), then remove the fuel fill door.





2. Install the fuel fill door in the reverse order of removal, and not these items:

- Push on the fuel fill door until the hooks of the fuel fill door hinge snap into place securely.
- Make sure the hooks are installed securely.
- Make sure there is no gap between the fuel fill door and hinge.