Body Emblem: Service and Repair

Emblem/Sticker Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- When removing the emblems, take care not to scratch the body or the lower rear window.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Do not use any metallic tools to remove the rear "H" emblem.

1. To remove the front "H" emblem, remove the front bumper Service and Repair.

2. Clean the body surfaces or the lower rear window surface where emblems are applied with a shop towel dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the clean surface.

3. Before applying the rear "H" emblem to the lower rear window, apply glass primer to the double-sided adhesive tape on the emblem and leave the emblem for at least 10 minutes at over 73°F (23°C) condition.

4. Apply the emblems where shown. When applying the rear "H" emblem, keep the condition at over 59°F (15°C) and push on the emblem to make adhesive stick securely.