Dashboard Passengers Middle Pad Removal / Installation

Dashboard Passenger's Middle Pad Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service Precautions before doing repairs or service.

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Do the battery terminal disconnection procedure Procedures, then wait at least 3 minutes before beginning work.

2. Remove these items:

- Center pocket:
- Without navigation Dashboard Center Pocket Removal / Installation (Without Navigation)
- With navigation Dashboard Center Pocket Removal / Installation (With Navigation)

- Passenger's dashboard trim Passenger's Dashboard Trim Removal / Installation
- Center dashboard vent (with navigation)
- Audio unit:
- Without navigation Audio Unit Removal/Installation (Without Navigation)
- With navigation Audio Unit Removal/Installation (With Navigation)

- Passenger's dashboard vent
- Front passenger's airbag Front Passenger's Airbag Replacement

3. Gently pull out along the edge of the passenger's middle pad (A) to release the hooks (B), then remove it.





4. Install the pad in the reverse order of removal, and note these items:

- Push the hooks into place securely.
- Do the battery terminal reconnection procedure Procedures.